Hybrid Polymer sealant VS Polyurethane Sealant: Papali ea Hao e Phethahetseng ke efe bakeng sa Bonding ba Lehae?

1. Selelekela

Polyurethane sealantle Hybrid MS Polymers

Lefats'eng lapolyurethanesealant leHybrid MS Polymerse hlahella e le likhetho tse peli tse fapaneng tse nang le thepa le lits'ebetso tse fapaneng. Ho utloisisa phapang lipakeng tsa mefuta ena e 'meli ea likhomaretsi ho bohlokoa bakeng sa ho khetha e ntle ka ho fetisisa bakeng sa projeke ea hau. Ha re ke re hlahlobeng papiso e qaqileng ea Polyurethane Sealant le Hybrid MS Polymers.

2. Sebopeho

Polyurethane sealant

• Makeup ea Chemical:Li-Sealants tsa Polyurethane hangata li entsoe ka karabelo ea polyols le poly
• Thepa:Li bonts'a matla a holimo, ho tenyetseha le ho hanyetsa metsi le mocheso.

Hybrid MS Polymers

• Makeup ea Chemical:Hybrid MS Polymers e ipapisitse le lipolima tse felisitsoeng ke silane, tse fanang ka lebasetere le ikhethang la silicone le k'hemistri ea polyurethane.
• Thepa:Ba ithorisa ka ho khomarela hantle ho mefuta e mengata ea li-substrates, ho kenyeletsoa tšepe, polasetiki le metsoako.

3. Kopo

Polyurethane sealantLisebelisoa

• Indasteri ea Kaho:Li-Polyurethane Sealants li sebelisoa hangata indastering ea kaho bakeng sa ho kopanya lisebelisoa tse fapaneng, joalo ka lehong, konkreite le litšepe.
• Lefapha la Likoloi:Li boetse li atile lekaleng la likoloi bakeng sa bonding ea panel bonding le windshield install.

Hybrid MS PolymersLisebelisoa

• Li-Sealants le Bonding:Hybrid MS Polymers e sebelisoa haholo joalo ka li-sealant le likhomaretsi kahong le tlhahisong ka lebaka la ho hanyetsa boemo ba tsona ba leholimo le ho tšoarella nako e telele.
• Indasteri ea Marine:Ho khomarela ha tsona hantle ho li-substrates ho li etsa tse loketseng bakeng sa ts'ebeliso ea metsing, ho kenyelletsa le ho haha ​​​​likepe le ho li lokisa.

4. Tshebetso

Matla le ho tšoarella

• Polyurethane sealant:Li-Sealants tsa Polyurethane li fana ka matla a phahameng le ho tšoarella, li etsa hore li tšoanelehe bakeng sa lits'ebetso tse hlokang.
• Hybrid MS Polymers:Hybrid MS Polymers e fana ka matla a ikhethang a ho khomarela le ho tšoarella ha nako e telele maemong a fapaneng a tikoloho.

Khanyetso ea Tikoloho

• Polyurethane sealant:Li bonts'a khanyetso e ntle ea metsi, lik'hemik'hale le mahlaseli a UV, a ntlafatsang bophelo ba tsona bo bolelele lits'ebetsong tsa kantle.
• Hybrid MS Polymers:Hybrid MS Polymers e bonts'a khanyetso e ntle ea boemo ba leholimo, mongobo le ho feto-fetoha ha mocheso, ho netefatsa ts'ebetso e tšepahalang maemong a thata.

5. Melemo le Mefokolo

Melemo

Polyurethane sealant:

• Matla a phahameng a pele a tlamahano
• Mekhoa e fapaneng ea ho kopanya
• E loketse lits'ebetso tsa sebopeho

Hybrid MS Polymers:

• Phaello e tlase ea VOC
• E ka penta ebile e ka tsamaisoa ka sandable
• Ho khomarela hantle ho li-substrates tse fapaneng

Mefokolo

Polyurethane sealant:

• Nako e telele ea ho ikoetlisa
• E kanna ea hloka ho lokisoa ha holimo
• Ho feto-fetoha ha maemo ka mokhoa o fokolang ho tse ling

Hybrid MS Polymers:

• Litsenyehelo tse phahameng tsa pele
• E utloang mongobo nakong ea ho phekola
• Ha e loketse li-substrates tsohle

6. Qetello

Ho etsa Khetho e Nepahetseng bakeng sa Morero oa Hao

Qetellong, ka bobeli Polyurethane Sealant le Hybrid MS Polymers li na le thepa le lits'ebetso tse ikhethang. Ha u khetha sekhomaretsi se loketseng morero oa hau, nahana ka lintlha tse joalo ka litlhoko tsa bonding, maemo a tikoloho le likhaello tsa lichelete. Hore na ke matla a matla a Polyurethane Sealant kapa ts'ebetso e fapaneng ea Hybrid MS Polymers, ho etsa qeto ka tsebo ho tla netefatsa katleho ea projeke ea hau.