LaSeal 732 Acetic High Grade Silicone Sealant
Iinjongo eziphambili
1.Ukutywina iingcango kunye neefestile;
2. Kuzo zonke izakhiwo ezinxulumene neglasi.
Iimpawu
1.Iasidi & yoqina; ubunzima obuphezulu; ukuqina ngokukhawuleza;
2.ukuqina okuhle; ukumelana nemozulu; ukumelana ne-ultraviolet;
3.i-ozone ukumelana; iyawakhaba amanzi;
4.ubushushu obuphezulu kunye nobushushu obuphantsi
Isicelo
1. Iiglasi ezahlukeneyo zokuhombisa zangaphakathi, i-aluminium alloy kunye neeprojekthi zesixhobo seglasi
2. Iiprojekthi ezahlukeneyo zeglazing
3. Isitywina kunye nesamente yocango lwealloyi kunye nefestile, umphambili wevenkile, ifestile yokubonisa, idiagonal kunye nomgca wekona yesibhakabhaka.
4. Ukusebenza kakuhle kokutywinwa kweglasi, ifayibha yeglasi, udongwe kunye neporcelain kunye nezinto ezingenamafutha.
Icwecwe leDatha yobuGcisa (TDS)
Idatha yeTekhnoloji:Le datha ilandelayo yenzelwe injongo yereferensi kuphela, ayenzelwanga ukusetyenziswa ekulungiseleleni iinkcukacha
LaSeal 732 Acetic High Grade Silicone Sealant
UmGangatho woVavanyo: GB/T14683-2003 《Silicone Building Sealant》
Into | Idatha |
Uhlobo | I-acetoxy |
Ubuninzi (g/cm3) | 0.98 |
Ukushukuma kwamandla | ±30% |
Ixesha lokucoca | 5-15 imizuzu |
Ixesha lokumisa (2mm/h) | 8-10 |
Ukomisa(4mm/h) | 18-22 |
Max. Tensile strength | 1.3 |
Ubunzima bonxweme | 21 ±2 |
Ukwandiswa ngexesha lekhefu(%) | ≥ 500 |
Modulus Mpa(100%) | 0.60 |
Ubushushu besicelo | -20℃ ukuya +40℃ |
Ukumelana nobushushu | -50℃ ukuya +100℃ |
ukuncamathelisa | KULUNGILE |
Ukumelana nemozulu | KULUNGILE |
Ukuncamathelisa okubandayo-kushushu | KULUNGILE |
Ngaphantsi kwe-adhesive yamanzi | KULUNGILE |
I-Elastic Recovery ratio (%) | 96 |
Ixabiso lelahleko enkulu (%) | 35 |
Ixesha lokumisa ulusu kunye nexesha lokumisa ngokupheleleyo phantsi: 23℃ kunye ne-50% yokufuma | |
Imida: Imveliso ayisebenzi kwindibano yesakhiwo okanye iprojekthi enesiseko semathiriyeli enobushushu obungaphezulu kwama-40 ℃.
Umyalelo
1.Coca izinto ezisisiseko ngelaphu: yihlambulule nge-solvent; ukuba imfuno ethile, gcoba umphezulu ngesiseko sepeyinti kwaye uyomise ngokupheleleyo.
2. Qinisekisa ukuba ugcwalise i-interface kunye nayo kwaye unamathele ngokuqinileyo kwizinto ezisisiseko.
3. Ukujongana novavanyo lokubambelela ngaphambi kokusetyenziswa kwaye uqinisekise ukuhambelana kakuhle kunye ne-viscosity yeemveliso kunye nesiseko sezinto.
Ukugcinwa kunye nobomi beshelufu
1.Bafanele bakhuselwe emanzini, kwiqabaka kunye neemeko zomoya ezimbi.
2.Mazigcinwe zomile kwaye zipholile kwiipalethi zomthi phakathi kwe +10 °C kunye +25 °C kwiimeko zokufuma.
3.Imveliso evuliweyo kufuneka idliwe ngokukhawuleza.
4. Ubomi beshelufu bubuninzi beenyanga ezili-12 buxhomekeke ekuthobeleni le miqathango yogcino ikhankanywe ngasentla.
Icwecwe leDatha yobuGcisa (TDS)
Idatha yeTekhnoloji:Le datha ilandelayo yenzelwe injongo yereferensi kuphela, ayenzelwanga ukusetyenziswa ekulungiseleleni iinkcukacha
LaSeal 731 Middle Quality Acetoxy Silicone Sealant
Into | Idatha |
Uhlobo | I-acetoxy |
Ubuninzi (g/cm3) | 0.98 |
Ukushukuma kwamandla | 30% |
ixesha lokutya | 5-15 imizuzu |
Ixesha lokumisa (2mm/h) | 8-10 |
Ukomisa(4mm/h) | 18-22 |
Max. Tensile strength | 1.3 |
Unxweme lobunzima A | 21 iSamurai 2 |
Ukwandiswa ngexesha lekhefu(%) | =500 |
Modulus Mpa(100%) | 0.60 |
Ubushushu besicelo | -20 C ukuya +40 C |
Ukumelana nobushushu | -50 C ukuya +100 C |
Ukuncamathelisa | KULUNGILE |
ukumelana nemozulu | KULUNGILE |
Ukuncamathelisa okubandayo-kushushu | KULUNGILE |
phantsi kwe-adhesive yamanzi | KULUNGILE |
UBuyiselo ngeElastical (%) | 96 |
Ixabiso lelahleko enkulu (%) | 35 |
Imida:Imveliso ayisebenzi kwindibano yesakhiwo okanye iprojekthi enesiseko semathiriyeli enobushushu obungaphezulu kwama-40 ℃.