LaSeal 976 Waterproof Anti-mildew MS Polymer Sealant
Iinjongo eziphambili
1.Ukutywina iingcango kunye neefestile;
2.Ngaphakathi nangaphandle usebenzisa, Weatherproof;
Iimpawu
1.Ipropati egqwesileyo yokulwa nokungunda.
2.Ipropathi egqwesileyo yomatshini: I-20 iklasi ephezulu ye-modulus, i-anti-mildew ehlala ixesha elide.
3.Ukunamathela ngokugqwesileyo kwizinto ezininzi zokuhombisa.
4.Good anti-ukuguga kunye nesakhono sezulu.
5.Environment friendly, ultra low VOC, ivumba free.
6.Inokupeyintwa ngaphezulu kunye neengubo ezininzi zomphezulu (uvavanyo lokuhambelana luyacetyiswa)
Isicelo
1.Ukutywinwa kokunqanda ukungunda kwamanzi;
2. Ukutywinwa kwamalungu eglasi, i-marble, ilitye, njl. ekhitshini, kwindawo yokuhlambela, kwigumbi lokuhlamba, njl.
3.Ukutywinwa kwamalungu kwindawo yokufuma okuphezulu.
4.Ukutywinwa kunye nokuvala umda kwiikona zokuhlobisa kwangaphakathi.
I-5.I-perimeter glazing yeefestile kunye neengcango;
Icwecwe leDatha yobuGcisa (TDS)
Idatha yeTekhnoloji:Le datha ilandelayo yenzelwe injongo yereferensi kuphela, ayenzelwanga ukusetyenziswa ekulungiseleleni iinkcukacha
LaSeal 976 Waterproof Anti-mildew MS Polymer Sealant
Umgangatho:
Ifikelela okanye igqithise iimfuno zezi nkcukacha zilandelayo:
Iimfuno zenkcazo yomxholo we-VOC kwikhredithi ye-LEED EQc4.1
"Iimveliso ezikhupha kancinci" zomgaqo we-SCAQMD 1168.
Iimfuno ze-VOC zesiFrentshi zeklasi A+
I-CE iphawulelwe i-EN 15651 kwizicelo ze-façade.
Into | Idatha |
Isiseko seMichiza | Isekelwe kwi-MS Polymer |
Inkqubo yoNyango | Ukunyanga ukufuma |
Umbala | Mhlophe/Mnyama/Mpunga |
Ukuxinana | 1.4±0.1 g/ml |
Ukuthatha ixesha lasimahla ≤ 1h | 10-20 min (23°C kunye ne%50 RH) |
Ubunzulu obunyangayo (iiyure ezingama-24) | ＞3.5mm (23°C kunye ne-%50 RH) |
Ubunzulu obunyangayo (iiyure ezingama-24) | ＞3.5mm |
Tensile strength | ≥2.3MPa |
Ukwandisa ngexesha lekhefu | ≥300% |
Phungula ucinzelelo | 2.5MPa |
Ukusasazwa kweenyembezi | 15 N/mm |
100% i-Tensile Modulus | ≥1.8MPa |
Unxweme A Ubunzima | 45-55A |
Ukumelana ne-UV | Egqwesileyo |
Cinezela umlinganiselo | ＞350ml/min |
Inkampani | ≤ 1.5% |
Ubushushu beNkonzo | +5°C ukuya +35°C |
Ubushushu besicelo | -50℃~120℃ |
Beka ubomi kwishelufa | Iinyanga ezili-12 |
Ukunyanga imeko yesampuli :23℃×50%RH×14 iintsuku | |
Ukulinganiselwa
● Kuphephe ukusebenza ngaphantsi kwe +5 °C nangaphezulu +35 °C.
● Musa ukusebenzisa kwii-silicones zokunyanga.
● Ubunzulu bokusebenza ngokudibeneyo yi-6 mm.
● Ukwandiswa okukhulu kunye nokucutheka makungadluli kwi-25% yomndilili wobubanzi obudibeneyo.
Ukulungiswa komphezulu
● Inkqubo ecetyiswayo yokucoca kunye nemathiriyeli zezi zilandelayo.
● Ukuhla kweglasi ngotywala okanye i-MEK
● I-Aluminiyam, i-alloys elula kunye nensimbi engenasici Ukunciphisa utywala okanye i-MEK
● Ezinye iiMetals I-Lightly abrade iphinde yohlise njengoko ingentla
● Umphezulu wokhuni ogqabhukileyo kancinci uze ususe uthuli
● IiPlastiki Ukwehlisa igrisi usebenzisa i-arhente ekhuthazwa ngumenzi weplastiki
● Izinto eziphathekayo kunye nezinye ialkaline Ibrashi kwaye ususe uthuli
Umyalelo
9.Ububanzi obudibeneyo / ubunzulu kufuneka bube yi-2:1.
Ukugcinwa kunye nobomi beshelufu
1.Bafanele bakhuselwe emanzini, kwiqabaka kunye neemeko zomoya ezimbi.
2.Zifanele zigcinwe zomile kwaye zipholile kwiipalethi zokhuni phakathi kwe +5 degree C kunye +25 degrees C kwiimeko ezingenamanzi.
3.Imveliso evuliweyo kufuneka idliwe ngokukhawuleza.
4. Ubomi beshelufu bubuninzi beenyanga ezili-12 buxhomekeke ekuthobeleni le miqathango yogcino ikhankanywe ngasentla.
Icwecwe leDatha yobuGcisa (TDS)
Idatha yeTekhnoloji:Le datha ilandelayo yenzelwe injongo yereferensi kuphela, ayenzelwanga ukusetyenziswa ekulungiseleleni iinkcukacha
LaSeal 731 Middle Quality Acetoxy Silicone Sealant
Into | Idatha |
Uhlobo | I-acetoxy |
Ubuninzi (g/cm3) | 0.98 |
Ukushukuma kwamandla | 30% |
ixesha lokutya | 5-15 imizuzu |
Ixesha lokumisa (2mm/h) | 8-10 |
Ukomisa(4mm/h) | 18-22 |
Max. Tensile strength | 1.3 |
Unxweme lobunzima A | 21 iSamurai 2 |
Ukwandiswa ngexesha lekhefu(%) | =500 |
Modulus Mpa(100%) | 0.60 |
Ubushushu besicelo | -20 C ukuya +40 C |
Ukumelana nobushushu | -50 C ukuya +100 C |
Ukuncamathelisa | KULUNGILE |
ukumelana nemozulu | KULUNGILE |
Ukuncamathelisa okubandayo-kushushu | KULUNGILE |
phantsi kwe-adhesive yamanzi | KULUNGILE |
UBuyiselo ngeElastical (%) | 96 |
Ixabiso lelahleko enkulu (%) | 35 |
Imida:Imveliso ayisebenzi kwindibano yesakhiwo okanye iprojekthi enesiseko semathiriyeli enobushushu obungaphezulu kwama-40 ℃.