ʻO LaSeal 976 ʻAi ʻAi ʻAi ʻO MS Polymer Sealant
Nā kumu nui
1. No ka hoʻopaʻa ʻana i nā puka a me nā puka makani;
2.Interior a me waho hoʻohana, Weatherproof;
Nā hiʻohiʻona
1. Outstanding anti-mildew waiwai.
2.Excellent mechanical waiwai: 20 papa kiʻekiʻe modulus, lōʻihi mau anti-mildew hiki.
3.Excellent adhesion i ka nui o nā mea hoʻonani.
4.Good anti-kahiko a me ka weatherproof hiki.
5.Environment aloha, ultra haʻahaʻa VOC, ʻala ʻole.
6. Hiki ke pena ʻia me ka hapa nui o ka uhi ʻana o ka honua
Palapala noi
1.Waterproof anti-mildew sealing;
2.Sealing hui o ke aniani, marble, pohaku, etc. i loko o ka lumi kuke, lumi lumi, holoi lumi, etc.
3.Sealing ami ma kiʻekiʻe humidity kaiapuni.
4. Sealing a me ka pani ʻana i ka lihi no nā kihi o ka hoʻonani i loko.
5.Perimeter glazing no nā puka makani a me nā puka;
Pepa ʻikepili ʻenehana (TDS)
ʻIke ʻenehana: ʻO ka ʻikepili ma lalo nei no ke kumu kuhikuhi wale nō, ʻaʻole i manaʻo ʻia no ka hoʻohana ʻana i ka hoʻomākaukau ʻana i nā kikoʻī
ʻO LaSeal 976 ʻAi ʻAi ʻAi ʻO MS Polymer Sealant
Kūlana:
Hoʻokō a ʻoi aku paha i nā koi o kēia mau kikoʻī:
Nā koi o nā kikoʻī maʻiʻo VOC ma LEED credit EQc4.1
"Nā huahana haʻahaʻa haʻahaʻa" o ke kānāwai SCAQMD 1168.
ʻO nā koi VOC Farani no ka papa A+
Ua hōʻailona ʻia ʻo CE no EN 15651 no nā noi façade.
'ikamu | ʻIkepili |
Kumu Kimia | MS Polymer Based |
Mechanism Hoola | Ka ho'ōla wai |
kala kala | Keʻokeʻo/ʻeleʻele/hina |
ʻO ka mānoanoa | 1.4±0.1 g/ml |
Ka manawa kūʻokoʻa ≤ 1h | 10-20 min (23°C a me %50 RH) |
Hohonu i hoolaia (24hours) | ＞3.5mm (23°C a me %50 RH) |
Hohonu i hoolaia (24hours) | ＞3.5mm |
Ikaika U'i | ≥2.3MPa |
Elongation i ka wā hoʻomaha | ≥300% |
ʻO ke koʻikoʻi shear | 2.5MPa |
Hoʻolaha waimaka | 15 N/mm |
100% Tensile Modulus | ≥1.8MPa |
Kahakai A Hardness | 45-55A |
ʻAʻole pale UV | maikaʻi loa |
Paʻi Laki | ＞350ml/min |
Hui | ≤ 1.5% |
Mahana lawelawe | +5°C a i +35°C |
Hoʻohana Mahana | -50 ℃~120 ℃ |
Ola ola | 12 mahina |
Ke kūlana ho'ōla o ka hāpana: 23 ℃ × 50% RH × 14 lā | |
Nā palena
● Hōʻalo i ka hana ma lalo o +5 °C a ma luna o +35 °C.
● Mai hoʻopili i ka hoʻōla ʻana i nā silicones.
● ʻO 6 mm ka hohonu liʻiliʻi no ka hui ʻana.
● ʻAʻole pono e ʻoi aku ka nui o ka hoʻonui a me ka ʻoki ʻana ma mua o 25% o ka laulā hui.
Hoʻomākaukau ʻili
● ʻO ke kaʻina hana hoʻomaʻemaʻe a me nā mea hana e like me kēia.
● Glass Degrease me ka waiʻona a i ʻole MEK
● ʻO ka aluminika, nā'āpana māmā a me ke kila kila Degrease me ka waiʻona aiʻole MEK
● ʻO nā metala ʻē aʻe E abrade māmā a laila degrease e like me luna
● ʻO ka lāʻau Hoʻomaʻamaʻa māmā i ka ʻili a laila wehe i ka lepo
● Plastics Degrease me ka hoʻohana ʻana i kahi mea hana i ʻōlelo ʻia e ka mea hana plastics
● Pākī a wehe i ka lepo ka lepo
Aʻo
9. He 2:1 ka lākiō laula a me ka hohonu.
Ka mālama ʻana a me ka mālama ʻana
1. Pono lākou e pale ʻia mai ka wai, ka hau a me nā kūlana ea ʻino.
2. Pono lākou e maloʻo a maloʻo ma nā papa lāʻau ma waena o + 5 degere C a me + 25 degere C i loko o nā kūlana manuahi.
3. Pono e hoʻopau kokeʻia nā huahana i weheʻia.
4. ʻO ka lōʻihi o ke ola ʻana he 12 mau mahina e pili ana i ka mālama ʻana i nā kūlana mālama i ʻōlelo ʻia.
Pepa ʻikepili ʻenehana (TDS)
ʻIke ʻenehana: ʻO ka ʻikepili ma lalo nei no ke kumu kuhikuhi wale nō, ʻaʻole i manaʻo ʻia no ka hoʻohana ʻana i ka hoʻomākaukau ʻana i nā kikoʻī
ʻO LaSeal 731 Mea Hoʻopaʻa Silikino Acetoxy Kūwaena
'ikamu | ʻIkepili |
ʻAno | Acetoxy |
ʻO ka mānoanoa (g/cm3) | 0.98 |
Ka neʻe ʻana o ka mana | 30% |
manawa ʻili | 5-15 minuke |
Ka manawa maloʻo (2mm/h) | 8-10 |
Hoʻomaloʻo (4mm/h) | 18-22 |
Max. Ka ikaika tensile | 1.3 |
Kahakai oolea A | 21 Samurai 2 |
ʻO ka hoʻolōʻihi ʻia i ka haki (%) | =500 |
Modulus Mpa(100%) | 0.60 |
Ka wela noi | -20 C a i +40 C |
Kūleʻa wela | -50 C a i +100 C |
Hoʻopili | OK |
pale ʻana i ka lewa | OK |
Paʻa anu-wela | OK |
ma lalo o ka wai pipili | OK |
Hoʻihoʻi hou ʻia (%) | 96 |
Ka nui o ka poho (%) | 35 |
Nā palena:ʻAʻole pili ka huahana i ka hui hoʻonohonoho ʻana a i ʻole ka papahana nona ka mea kumu i ka wela o ka ʻili ma luna o 40 ℃.